1. KC501: for Key Chip Programming Support MCU/ EEPROM Chips Reading&Writing
2. KS-1: Support Toyota/Lexus Add Transponder/Smart Key/Remote Learning, All key Lost
3. KS-2(for Mitsubishi All-Keys-Lost)
4. M821: for Mercedes-Benz All Keys Lost
5. M822 Key Programmer (not included): for Toyota 8A chip blade key programming;
M822 Contains The Functions of M821
X100 PAD 3 With KC100 Key Programmer & EEPROM Adapter
Note: For Toyota smart key All Key Lost need KS-1 Add on.
OE-Level ALL SYSTEMS DIAGNOSTICS
X100 PAD3 has Auto Scanfunctionality to quickly scan every individual control module in the car, and not just basic universal systems like the En/g/ine, Trans, ABS, SRS. It can comprehensivelyFull System Diagnose, Surpass OEM Scanners: 2025 XTOOL new releaseX100 PAD3 V2.0 embodies all system diagnostic with its 8in display. It can perform ✔️Read/Clear Codes✔️View Live Data Stream--Show 8 Live Data in 1 Graphing✔️Record & Playback Data✔️Capturing freeze frames✔️Active Test✔️Special Reset on all available systems like ABS ECM BCM SRS TCM TPMS etc. Based on ✔️CAN Fast Scan/Auto VIN,X100 PAD3 V2.0 provides faster speeds and more accurate results than OE scanners.
BI-DIRECTIONAL CONTROL/ACTIVE TESTS
Odometer Adjustment:
for VW /for AUDI/for SEAT/for SKODA, for BUICK, for CADILLAC, for CHEVROLET, for CHRYSLER, forFORD, for MAZDA, forNISSAN, for SUZUKI, for KIA, for HYUNDAI, for JAGUAR, for LAND ROVER, for PORSCHE and more…
38+ MOST USEFUL MAINTAINENCE SERVICES
Note: All the special functions do NOT work on all cars. Please come to us with VIN number to check compatibility before purchase.
Oil Reset: Perform reset for a new countdown of engine oil life system once changed the oil.
EPB Reset: Maintain the electronic braking system safely and effectively.
SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
BMS Reset: Register the newly replaced car battery into the ECU.
Gearbox Match: Matching the gearbox/transmission after replacement.
ABS Bleed: Bleed the air out of the ABS system for firm brake pedals.
Suspension Calibration: Calibrate the air suspension and the height of each wheel.
Injector Coding: Code the new injectors after replacement for accurate fuel injecting control.
Other service options includes Throttle Relearn, ABS Initialization, Window Initialization, Idle Relearn, Zero Point Calibrations, Fuel Trim Reset, Acohol Composition Reset, EVAP Test, TPMS Reset, VGT Turbo Calibration, Power Balance, Headlight, Window Reset, Seat Match, Tire Refit, Crankshaft Position Variation Learn, Airbag Reset, Transport Mode, Electronic Pump Activation and etc.
Support FCA AutoAuth/CAN FD/DoIP/RP1210 Protocols
The XTOOLX100 PAD3 V2.0 obd ii scanner enables OBDII, EOBD, CAN FD (for GM/Buick/Cadillac/Chevrolet 2020+ cars), and DoIP(for BMW E/F/G Chassis/for Jaguar/for Land Rover/for Volvo) diagnostics. Our OBDII scanner works with over 10,000 vehicle models, including US 1996 and newer, and EU 2001 and newer models, as well as work trucks, light trucks, SUVs, and hybrids. The FCA AutoAuth feature enhances diagnostics for FCA vehicles (for Chrysler, for Jeep, for Dodge, for Fiat 2018 and later) without gateway restrictions. 🔔Note: FCA support is currently available only in North America; for other regions, please consider purchasing the XTOOL 12+8 Cable Adapter.
Advanced ECU Offline Coding & VAG Guided Functions
XTOOLX100 PAD3 V2.0 scan tool offers advanced ECU Coding for BENZ, for Mitsubishi, for VW, for AUDI, for SKODA, allowing customization of settings like activating advanced car features and disabling annoying features. It easily guides VAG vehicles (for Volkswagen, for Audi, and for Skoda) for diagnosis and maintenance through the VAG.
UP TO 8 Live Data Showing in 1 Graphing for more in-depth analysis
Instead of just 8 separate data streams appearing on one screen, the XTOOLX100 PAD3 V2.0 can display 8 live data streams in one graph.Display these graphics individually or merge them for easier comparison on the screen. Which makes diagnosis easier and more convenient.
Newly Added Pre/post scans/Diagnostic Report V2.0
Pre-scan identifies existing issues and pending dtcs, ensuring no problem is overlooked before repairs. Post-scan confirms all dtcs are resolved, giving your vehicle a clean bill of health. Pre/Post Scan helps mechanics, DIYers get clear comparisons of vehicle conditions before and after repairs; You can add your shop name and logo/car model/detail photos and other information on the diagnostic report.Whicn helps to customize diagnostic report for for User Friendly, Faster, Convenient Diagnosis Result Checking.
Live Data Export to CSV File & Data View &Diagnostic Report Share/Print
Allows you can export the live data to csv file for storage and comparison over time, or view its graphing change and text readings soon afterwards.You can share report by email and print it via Bluetooth to printer.
2-Year Software Update
XTOOL scanner X100 PAD 3 comes 2 years free software update. You can added car models coverage, improve performance and capabilities within its fold for 2 years. You can still use the scanner normally even when the free updates period expires.
Auto VIN SCAN for Quick Diagnosis
X100 PAD 3 diagnostic scan tool will start auto-detected process and you can scan your car’s detailed version information with one click. You can always navigate your vehicle manually to perform diagnostics if the AuoVIN do not work in some cases.
PIN Code reading with EEPROM
XTool X100 Pad3 EEPROM Adapter Connection:
The KC100 programmer functions:
Support for Volkswagen for Audi for Skoda 4th generation, 5th generation, MQB key matching
Support for Volkswagen for Audi for Skoda 4-generation 96-bit online, 5-generation online, MQB online key matching
Support for BMW CAS1-CAS3 + key matching
Support for Land Rover's smart key write start function after 2015
Support for Fiat, for Fischer, 500, for Palio and other models
Support for Toyota for Lexus all lost and disassembly-free, can realize 94, 98, 88, A8, A9, 39 simulation key generation
How to Use KC100 with X100 PAD3 for 4th and 5th immobilizer:
KC100 works with VW/Audi/Skoda/Seat 4th and 5th immobilizer software and BMW CAS1-3 and BMW CAS4 immobilizer software. Lets take VW as an example. Since VW 4th and 5th Immo programming needs online programming, please make sure X100 PAD3 connect Internet before doing programming.
Please find operation steps as below:
1. Please use main cable and OBDII connector (or other relative connector) to connect between X100PAD3 and your car's OBD port.
2. Please use USB to mini USB cable to connect between X100PAD3 and KC100.
3. Please switch ignition on position, then enter software as following steps:
Immobilization - VW - 4th/5th Immobilizer System
4.If your car is 4th immobilizer system, please click 4th immobilizer system. If your car is 5th immobilizer system, please click 5th immobilizer system. It will detect your meter type automatically, if it does not detect successfully, you can choose your meter type manually.
5.Then follow the instructions that software reminds you to copy new keys
KS-1 functions: Buy Separately SK298
KS-1 Toyota / Lexus all keys lost-free disassembly, Five-in-one simulation card for generating emergency simulation keys.
Once all the Toyota / Lexus keys are lost, the smart box and other modules in the car need to be disassembled,then turn on the ignition switch, so that the smart key can be removed and added, and the operation is tedious.
KS-1 The five-in-one simulation card can eliminate the need to disassemble the smart box and other modules. As long as the original car data is read from the OBD to generate the simulation card, the ignition switch can be turned on to realize the function of clearing and adding the smart key.
The free disassembly for all keys lost requires an original car key. By reading and decrypting the original car anti-theft data, writing the data to the simulation card is equivalent to generating an original car key. Then you can follow the key addition process.
Support Toyota 94 / D4, 98, 39, 88 / A8, A9 type smart key all-key-lost matching.
The simulation card can be reused. After matching the key, turn off the power or remove the battery to restore the initial state.
Support generation, copy and simulation of key chip
XTool X100 Pad3 Vehicle Diagnosis Connection:
a. Turn on X100 PAD3 tablet
b. Connect cables and X100PAD3 in following order: ①→②→③→④
c. Switch on the ignition and tap on X100PAD3 application to test vehicles. (Shown as
follows)
① X100PAD3 Tablet
② Main cable
③ OBDII-16 Adapter (Select other adapters if needed)
④ Measured vehicle
Xtool X100 PAD3 Update:
XTOOL scanner X100 PAD 3 comes 2 years free software update. You can added car models coverage, improve performance and capabilities within its fold for 2 years. You can still use the scanner normally even when the free updates period expires.
Xtool X100 PAD3 Specifications:
CPU:4 Core 1.8GHz
System :Andriod 5.1.1
Monitor :8 inches
Resolution:1024*768 px
Battery :3.7V, 10000mAh, Rechargeable Lithium-ion Battery
Camera :8 mega Pixels
RAM:2G
Storage:64G
Transmission:WIFI/BLUETOOTH
Interface :USB/DC/DB15
Function | Xtool A80 Pro | Xtool A80 | Xtool X100 PAD3 |
Picture | ![]() |
![]() |
![]() |
Read ECU Information | √ | √ | X |
Read Trouble Code | √ | √ | √ |
Clear Trouble Code | √ | √ | √ |
Live Data | √ | √ | X |
Read Freeze Frame | √ | √ | X |
Actuation Test | √ | √ | X |
OBDII Scan | √ | √ | √ |
Instrument Cluster | √ | √ | √ |
IMMO | √ | √ | √ |
Key Programming Vehicles | 67 Models | 70 Models | 83 Models |
EEPROM Adapter | (optional) | (optional) | √ |
KC100 | (optional) | (optional) | √ |
KC501 | (optional) | (optional) | (optional) |
Online/Offline Programming | √ | X | X |
Coding | √ | X | X |
Brush Hiden | √ | X | X |
Oil Service Reset | √ | √ | √ |
EPB | √ | √ | √ |
TPS | √ | √ | √ |
Window Initialization | √ | √ | √ |
TPMS | √ | √ | √ |
ABS Bleeding | √ | √ | √ |
Gearbox Match | √ | √ | √ |
BMS Reset | √ | √ | √ |
HeadLight | √ | √ | √ |
Air Suspension | √ | √ | √ |
SAS Reset | √ | √ | √ |
Crankshaft Resync | √ | √ | √ |
DPF | √ | √ | √ |
Injecytor Code | √ | √ | √ |
Airbag Reset | √ | √ | √ |
Cylinder | √ | √ | √ |
Seat Configuration | √ | √ | √ |
Electronica Pump Activation | X | X | √ |
Performance Tire Upgrade | X | X | √ |
Disable Transportation | X | X | √ |
Xtool PAD3 Feedback:
Hi I wanted to tell you that I made bmw x3 key2015 cas4 online works great
Reads errors very quickly, a bunch of car brands are activated. On the school tried the odometer adjustment, everything went super, just after adjustment, there was a record in the block of the engine and pillows, respectively, they were removed and no longer appeared. Machines are many different, so in the next month I will test, I hope that the device will please. Definitely, I can advise, my money is
The item is in accordance with the description, excellent quality. Came very quickly. Seller Support at a high level. Responded quickly to all emerging questions. I recommend the seller as good and responsible. Thank you! Very pleased
Xtool X100 PAD3 Package includes:
Main Units:
Mini B to USB 3.0 Type C Cable,X100 PAD3 Tablet,KC100,EEPROM 2 Adapter, Charger For tablet, Charger US Adapter, Charger EU Adapter
Test Connectors:
OBDII-16, HONDA-3,MAZADA-17,KIA20,HYUNDAI/KIA-10, DB15 Main Cable, USB3.0 Main Cable (1m)
Accessories:
Certificate of quality,Packling List,User Manual,Tool Case,Carton
XTOOL X100 Pad3 vs X100 Pad2:
Item | Xtool X100 PAD3 | Xtool X100 PAD2 Pro |
Image | ![]() |
![]() |
Brand | Xtool | Xtool |
Release year | 2020 | 2016 |
Hardware | Operating system: Android Processor: quad-core processor 1.8GHz Memory: 2G RAM, 64G ROM Display/touch screen: 1024•768 resolution, 8 inches LED Compatible touch screen Camera: Rear camera, 8 million pixels, with flash autofocus. Sensor: Gravity sensor Audio input / output: microphone, 4 band 3.5 millimeter stereo. Interface: USB3.0, DC charging port, MINI HDMI, DB15 interface. Battery: 10000mAh 3.7V lithium polymer battery Input voltage: +9~+36VDC, compatible with 12V and 24V voltage system |
Wi-Fi: WIFI 2.4Ghz Memory: 2GB RAM, 32GB Flash Sensors: Gravity Sensor, Light Sensor Power Consumption: 29.6W CPU: Quad-Core, 1.6 GHz Operating System: Android 4.4.4 Bluetooth: 100 Meters Display: 8.0 Inch IPS 5-Point Multi-touch Screen with 1024×600P Resolution Battery: 4000mAh, 7.4V Dimension: (L*W*H): 240*177*30mm Power Voltage: 12V |
UI | Much more clearer (the car brand logo is blue and the background is white)![]() |
The car logo is white and the background is black.![]() |
Communication | USB 3.0, WIFI 2.4Ghz | USB,WIFI 2.4Ghz |
Immobilization | Asia: Toyota, Lexus, Honda, Acura, Mazda, Nissan, Infiniti, Mitsubishi, Subaru, Suzuki, Kia, Hyundai, Daewoo, SSANGYONG, Proton, etc Europe: Audi, VW, Skoda, Seat, Porsche, Opel, Citroen, Peugeot, Jaguar, Land Rover, Lincoln, Renault, etc America: GM, Cadillac, Buick, Chrysler, Ford etc China: Great Wall, Chery, Brilliance-auto, Geely, LIFAN, HAFEI, CHANGAN, LANDWIND, BYD, BYD , JAC, etc. |
America:Buick, Cadillac, Chevrolet, Dodge, GM, GMC, Hummer, Pontiac, Saturn, Ford Asia:Acura, Honda, Hyundai, Infiniti, Isuzu, KIA, Lexus, Mazda, Mitsubishi,Nissan, Ssangyong, Subaru, Suzuki, Toyota China:BYD, Great Wall Motor, Brilliance, JAC, Geely Cars, Lifan Cars, Chery Europe:Audi, Benz, Citroen, Ford, Fiat, Jaguar, Lancia, Land Rover, Opel, Peugeot,Porsche, Renault, Romeo, Seat, Skoda, Smart, VW |
VAG 4th 5th IMMO | yes, when working together with KC100 adapter that comes in the package. | yes, when working together with KC100 adapter that comes in the package. |
Toyota Smart Key All Keys Lost | Yes, when working together with the KS-1 emulator (need to buy additionally) | Yes, when working together with the KS-1 emulator (need to buy additionally) |
Odometer adjustment | VW / Audi/ Seat/ Skoda, Buick, Cadillac, Chevrolet, Chrysler, Ford, Mazda, Nissan, Suzuki, Kia, Hyundai, Jaguar, Land Rover, Porsche And More… | VW /Audi/Eat/Skoda, Buick, Cadillac, Chevrolet, Chrysler, Ford, Mazda, Nissan, Suzuki, Kia, Hyundai, Jaguar, Land Rover, Porsche And More… |
Common diagnosis | Yes, can access to all system of all car models from Europe, Asia, America | Yes, can access to all system of all car models from Europe, Asia, America |
Full-functional diagnosis | Yes. I.e VW diagnosis: basic OBD diagnosis + coding + adaptation | No. i.e VW diagnosis: basic OBD diagnosis, no coding, no adaptation |
Special Service | 1. Service/Maintenance Light 2. Steering angle sensor adjustment 3. Window Initialization 4. Throttle Relearn 5. DPF 6. BMS Reset 7. Seat Match 8. Electric Parking Brake 9. Cylinder 10. Airbag Repair 11. Air Suspension 12. Injector Coding 13. EEPROM Adapter 14. Headlight 15. Type pressure reset 16. Gearbox Match |
1. EEPROM Adapter 2. BMS Reset 3. Electric Parking Brake 4. Steering angle sensor adjustment 5. DPF 6. Service/Maintenance Light 7. Air Suspension 8. Headlight 9. Type pressure reset 10. Throttle Relearn |
Update | X100PAD3 updates directly via the Internet using WiFi or wired connection. To access the update application open the X100PAD3 application and click UPDATE | One-click update via WIFI. |
Language | English, Spanish, French, Turkish, Indonesian, Thai and Portuguese | English, Spanish, French, Turkish, Indonesian, Thai, Portuguese |
Package | Main Units: Mini B to USB 3.0 Type C Cable X100 PAD3 Cable KC100 EEPROM 2 Adapter Charger For tablet Charger US Adapter Charger EU Adapter Test Connectors: OBDII-16 HONDA-3 MAZADA-17R KIA20 HYUNDAI/KIA-10 DB15 Main Cable USB3.0 Main Cable (1m) Accessories: Certificate of quality Packing List User Manual Tool Case Carton |
Main Units: X-100 PAD2 USB TYPE-C and Mini_USB shift cable Charger for Tablet US Power Adapter KC100 EEPROM adapter EU Power Adapter Test Connectors: HYUNDAI/KIA-10 KIA-20 HONDA-3 DB15Male To VGA_Male USB TYPE-C OBD II-16 MAZDA-17R Accessories: Carton Packing List User Manual Certificate of Quality |