2 Years Free update 2024 Xtool X100 PAD3 Plus KS-1 Key Emulator for Toyota/Lexus All key lost ECU Coding & PMI, 38+ Services, Bidirectional Control, All Systems Diagnosis

Product Description

XTOOL X100 PAD3 Key Fob Programming Tool with KS-1 + KC100 Key Programmer 
 

Top Reasons to Get Xtool X100 PAD3 with KS-1
 
1. All-in-One Key Fob Programming & Diagnostic Tool
2. with KS-1 Smart Key Emulator & KC100 Key Programmer & EEPROM Adapter, perform ALL KEY Lost for Toyota, for Lexus and perform Add New Key for BMW, for MINI, for VW, for AUDI, etc.
3. ECU Coding & PMI & ECU Configuration
4. 38+ Special Functions
5. Full Systems Diagnostics & Bi-Directional Controls
6. Multi-Language: English, German, French, Spanish, Finnish, Italian, Japanese, Portuguese, Russian, Korean, Polish, Arabic, send us the serial number to change the language.
7. Update Via WIFI (always equip your device with the latest software)
8. Two Years Free Update, after 2 years, You can buy update here
9. IMMOBILIZER, DIAGNOSIS, SPECIAL FUNCTION Car list, NOT ALL MODELS ARE COMPATIBILE and FUNCTIONS VARY ACROSS VEHICLES. Check compatibility with VIN first if needed.
10. CAN FD Protocol & 10,000+ Vehicles Coverage



XTOOL X100 PAD3 and KS-1 Functions: 
 

• Advanced IMMO/Key Programming: Read PIN, add new keys, smart key programming, remote learning, disabIe losst keys, make dealer key, , all-keys-losst, IMMO ECU Coding/Reset, backup IMMO Data, Read immokey data , etc.Equipped with KC100 key programmer and KS-1, X100 PAD3 is ideal for automotive mechanics, advanced DIYers, garages, workshops, or locksm!ths who need more advanced key programming functions.
• Car Key Programmer KC100 Included: Add new keys for BMW, for Mini, for VW, of Audi etc.
• KS-1 Toyota Smart Key Emulator Included: Perform the All-key-Lost for Toyota, for Lexus, etc.
• ECU Coding & PMI: Performs Online ECU Coding on VW, on Audi, on Skoda vehicles to match components reset adaptive values after ECU replacement and customize car settings such as turn the seat belt buzzer off to get better vehicle performance.VAG Guided Functions offer you step by step instructions while performing complex special functions. PMI is able to help you copy the data on old module to new module like ABS, BCM, EPS, etc.
• 38+ Special Functions: Commonly-used special functions like Oil Reset, ABS Bleeding, EPB, BMS Reset, SAS, Throttle, Suspension, Headlight, Injector Coding, Transmission Match, TPMS Reset, Airbag Repair, etc. Vehicle-specific functions under each vehicle included, for example, Cylinder Power Balance, Crankshaft pos. Variation learn, Zero Point Calibration, Fuel Injector Balance, Fuel Trim Reset, Fuel composition reset, sws calibration, ABS Initialization,HVAC Calibration etc.
• All Systems Diagnostics: XTOOL X100 PAD3 diagnostic tool is able to perform dealership-level diagnosis for all available systems on vehicles like Engine, Transmission, SRS, ABS, BCM, etc. Read/clear codes, check live data PIDs in text or graph, form freeze frame, read ECU Information, and perform active tests.
• Bi-Directional Controls: Control specific car components to perform active testsike EVAP test, Compression test, Cooling fan test, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Window/Door Lock//Mirror/Sunroof/Horn/Wipers Test, etc.
• CAN FD Protocol: Also works on GM MY2020+ models without needing extra adapters, covering 10,000+ Vehicles globally from America, Asia, Europe, Australia, and China. Vehicle coverage will keep growing with the frequent updates.
• 8-IN-I Graphing Live Data: Select and Combine Up to 8 live data elements into one chart so you can monitor them in one graph. Or display up to 8 graphs on one screen so you can compare them simultaneously.
• Data Export & Data View: Export the live data into CSV files so you can view them CSV-records on the computer via USB cable or view the live data graphs of those streams you exported on the device.
• Auto Scan: Automatically detects and scan the vehicles to speed up the process. Try other navigation ways if some vehicles cannot be detected automatically.
• Works with Key Programmers to Extend IMMO Capabilities: Works with KS-2 key programmer for Mitsubishi All_Keys_Losst, KC501 for Mercedes Benz key programming, M821 for Mercedes Benz All_Keys_Losst, M822 for Toyota, for Lexus, 8A chip blade key programming.Note: KS-2 /KC50/M821/M822 not included.

X100 PAD3 key programmer Features:
 

• Read PIN ECU Synchronization
• Read keys/fobs available Unlock OEM key
• Program Smart Keys Add Keys/fobs
• All Keys/fobs Los*t Program Key Chip
• Remote Learning Backup/Restore EEPROM data
• Reset the Dashboard Make Dealer Key
• DisabIe Los*t Keys More>>>

38+ Maintenance Services
 

Reset & Relearn & Matching & Adaptation & Calibration & Adjustment & Initialization

• ABS Bleeding: Bleed the air out of the ABS system for firm brake pedals.
• Oil Reset: Reset service intervals after oil change and turn off the oil light.
• Gearbox(Transmission) Match: Match the gearbox / transmission after replacement.
• HV Battery: Disconnect the power output of the high-voltage battery to the vehicle or view the data of the small batteries in the battery pack.
• D*P*F Regen: Clear PM(Particulate Matter) from the D*P*F filter.
• VGT Relearn: Relearn the VGT Turbo after replacement.
• Throttle: Enable you to make initial settings to throttle to adjust the amount of air intake.
• BMS Reset: Register the new battery to the ECU after replacement.
• EPB Reset: Reset brake pads after replacement of brake system.
• SAS: Perform calibration of the steering angle sensor.
• Injector Coding: Code injectors after replacement.

Other commonly used maintenance services are: Power Balance, A/C Relearn, TPMS Reset, Gear Learning(Crankshaft Relearn), Suspension, Headlight, Seat Match, Tire Upgrade, Airbag Repair, Windows Initialization, EEPROM, A/F Reset, Electronic Pump Activation, Start/Stop Reset, Language Change, Transport Mode, etc.

Vehicle-specific functions including: EVAP Test, Crankshaft pos. Variation learn, Zero Point Calibration, Cylinder Power Balance, Cam Crank Relearn, Fuel Trim Reset, Fuel Injector Balance, Fuel Composition Reset, Service Bay Test, ABS Initialization, SWS Initialization, Transmission Service Fast Learn, Idle Speed Control Reset, Steering Wheel Angle Sensor Learn, Passenger Presence Sensor Learn, HVAC Calibration, etc.
NOTE: Functions available on each vehicle are different. Please check compatibility with VIN and functions before order

XTOOL X100 PAD3 Full Systems Diagnosis
 

All Systems Diagnosis: Perform dealership-level car diagnostics on all available systems like Engine, BCM, ABS, SRS, Transmission, PCM, BMS, etc, with complete capabilities for codes, live data streams, ECU information, etc, including full OBD2 functions.

Live Data: Display live data PIDs like oil pressure, fuel temperature, coolant temperature, transmission oil temperature, fuel trim, O2 sensors, ATF temperature, cylinder balance rates, engine speed, etc. Show them in text or graphs individually.

AUTO SCAN: Quickly detect and scan the vehicle to start the diagnosis.

FULL BI-DIRECTIONAL

XTOOL scanner X100PAD3 also has bidirectional controls that can help you perform various active tests on the specific subsystems or components like pumps, valves, motors, mirror, windows, doors, wipers, clutches, lights, injectors, solenoids, roof, horn,etc. Popular active tests are shown as below:

Door Locks/Unlocks, Activate the Solenoid Evap Test

Window Up/Down Compression Test A/C Clutch

Front Motor Up/Down Fuel Pump Relay Injector Test

Cooling fan Test Wipers/Horn/Roof More>>>

NOTE: Actuation tests menus displayed vary across vehicles.

Graphing: Graph live data streams up to 8
Sharing: Share diagnostic reports via ema!l
Printing: Print out the reports as a proof
Export: Export the data to CSV files for better analysis
Remote: Schedule a remote with our engineers to assist you more quickly
Endoscope: Work with Endoscope to help you better check the vehicle health(endoscope not included)
ECU Coding: Customize the car setting on VW, on Audi, on Skoda based on your needs.
VAG Guided Functions: Don't worry about the complex procedures on some functions. This will give you step-by-step instructions.
ECU Configurations: Activate some hidden functions such as folding the rear-view mirro, or deact!vate the annoying features like turnning off seat belt chime, daytime running lights etc.
PMI: Cope the data from old module to new module after replacement like ABS, BCM, EPS, etc.
CAN/CAN FD/KPW Protocols: Support CAN/CAN FD/KPW Protocols, no need for adapters.
10,000+ Vehicles: Work on more than 10,000 vehicles currently, including 12 Volts sedans, light duty trucks, SUVs. Never stop growing!

X100 PAD3 hardware configurations:

CPU：4 Core 1.8GHz
System ：Andriod 5.1.1
Monitor ：8 inches
Resolution：1024*768 px
Battery ：3.7V, 10000mAh, Rechargeable Lithium-ion Battery
Camera ：8 mega Pixels
RAM：2G
Storage：64G
Transmission：WIFI/BLUETOOTH
Interface ：USB/DC/DB15

XTool KS-1 Specification

Battery: CR2025 3V 165mAh
Standby current: ≤2μA
Reading and writing frequency:    125kHz
Status Indicator Lamp: 1pc (mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading)
Update: The simulation card firmware can be updated with KC100
Working temperature: -20℃~60℃
Storage temperature    : -20℃~70℃
Structure size: 66mm*40mm*12mm

Package includes:

1*Whole Set X100 PAD3
1*KS-1 Emulator