Product Description
Xtool KS-1 Toyota / Lexus all keys lost-free disassembly, Five-in-one simulation card for generating emergency simulation keys.
Once all the Toyota / Lexus keys are lost, the smart box and other modules in the car need to be disassembled,then turn on the ignition switch, so that the smart key can be removed and added, and the operation is tedious.
XTOOL KS-1 Toyota Smart Key Emulator Support Toyota/LexusAll Key Lost via OBD2
Xtool KS-1 Emulator Description:
KS-1 The five-in-one simulation card can eliminate the need to disassemble the smart box and other modules.
As long as the original car data is read from the OBD to generate the simulation card, the ignition switch can be turned on to realize the function of clearing and adding the smart key.
Top 7 Reasons to Get Xtool KS-1
1.Toyota/Lexus All Lost Nodisassembly
2.Support Toyota/Lexus all key lost and dismantled,read the original car data from OBD to
generate emergency simulation key,directly drive the car without disassembly,intelligent and efficient
3.Intelligently Generate New Keys
4.Through reading of the original car data,a smart key is generated,which can be operated according to the process of adding a key.
Supporting the generation,copying and simulation functions of the key chip
5.More Cars
Support Toyota 94 / D4, 98, 39, 88 / A8, A9 type smart key all-key-lost matching. Matching speed is fast
6.Reuse
After matching the key, turn off the power or remove the battery to restore the initial state
7. Can be used again and again.
XTOOL KS-1 Toyota Smart Key Simulator is compatible with the following devices:
Xtool X100 PAD2 (need buy kc100)
Xtool X100 PAD2 PRO
Xtool A80(need buy kc100)
xtool PS90(need buy kc100
X100 PAD3
Key Type Tested Already
NO. |
Vehicle |
Year |
Key Type |
Support or Not |
Remarks |
1 |
RAV4 |
2015 |
88 |
Yes |
|
2 |
Alphard |
2013 |
94 |
Yes |
|
3 |
Alphard |
2015 |
A9 |
Yes |
|
4 |
Previa |
2008 |
94 |
Yes |
|
5 |
Crown |
2010 |
98 |
Yes |
|
6 |
Crown |
2015 |
A8 |
Yes |
|
7 |
Crown |
2016 |
A8 |
No |
After 2016,Toyota Crown is not supported |
8 |
Prado |
2011 |
98 |
Yes |
|
9 |
Previa |
2013 |
94 |
Yes |
|
10 |
Reiz |
2011 |
98 |
Yes |
|
11 |
Innova |
|
39 |
Yes |
The car is being tested for the Indian Tango |
XTool KS-1 Specification
Parameter |
Index |
Battery |
CR2025 3V 165mAh |
Standby current |
Standby current≤2μA |
Reading and writing frequency |
125kHz |
Status Indicator Lamp |
1pc (mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading) |
Update |
The simulation card firmware can be updated with KC100 |
Working temperature |
-20℃~60℃ |
Storage temperature |
-20℃~70℃ |
Structure size |
66mm*40mm*12mm |
Package List
1*KS-1 Toyota Smart Key Emulator