1. OE-Level Full System Diagnostic with Topplogy Module Mapping
2. 42+ Maintenance Services & Full Special Functions
3. ECU Programming for Benz/BMW/VW/AUDI/SKODA/FORD(off line)/MAZDA(off line)
4. Programmable Module Installation(PMI) function
5. Bi-Directional Control
6. Support CAN FD/DoIP
7. Advanced ECU Coding & Refresh Hidden Functions
8. IMMO/Key Programming
9. BT Connection & Wired Connection via USB Type B cable:
10. 3 Years Software Udpate, Click Diagnosis-updates
11. Support 14+ Languages: English, German, French, Spanish, Finnish, Italian, Japanese, Portuguese, Russian, Korean, Polish, Arabic, Chinese send us the serial number to change the language
OE-Level Full System Diagnostics:
XTOOL D9S Pro is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a Dealership- Level only diagnosis, getting the accurate and in-depth results across all automotive systems.
Smart AutoVin & Auto Scan+BT Connection+Cable Connection：
XTOOL D9S Pro provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the D9S Pro to communicate with the vehicle through BT connection, providing you with higher mobility. Use AutoVin to automatically read the vehicle identification number, or access the OBDII menu to use Auto Scan to perform a comprehensive scan of all available modules to shorten the diagnosis time.
Commonly-Used 42+ Services:
XTOOL D9S Pro With car service tool is designed for mechanics and workshop, garages. Along with the standard service functions like Oil Reset, EPB, SAS Adjustment, DPF Regeneration, Throttle Relearn and Injector Coding, IMMO, ABS Bleeding, TPMS Reset, BMS Reset, etc. Note: Service functions does not work on all vehicles.
Bi-Directional Control/Active Tests+ECU Coding + ECU Programmer：
XTOOL D9S Pro is a bi-directional scan tool with ECU codding ,allows you to receive information to and from the vehicle’s onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That’s helpful for DIY mechanics, speeding up the troubleshooting process when it’s time to make repairs.
Support Newest Doip and with CAN FD Functions
the D9S Pro can works for the Doip protocol and CAN FD .CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)
Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. XTOOL D9S Pro is equipped with advanced ECU coding function for addressing the following issues:
After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
By changing the code with the ECU coding, it’s easy to improve vehicle performance or stimulate high-end functions for the car.
ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
ECU Online Coding is available for BMW, VW, Porsche, Renault, etc.
Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.
2.All System Bidirectional Scan Tool -XTOOL D9S Pro (Bigger,Bidirectional,Better )
With this diagnostic tool’s Active Test, you can output the command into the ECU in order to turn on/off actuators, to find faults in the subsystems of your car effortlessly, without using the vehicle’s control: Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door lock … （Available test varies by the vehicle manufacturer, year, and model.）
3.Support DoIP protocol
4.Support CAN FD protocol
6. Auto Vin Scan ：Smart AutoVIN technology for fast and precise identifying vehicles in one touch to scan ECUs, acquire vehicle info and run diagnostic on selected systems.Quickly get your car’s information,save your time.
ECU CODING – The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
Injector Coding - Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed
BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS Calibration – Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
BATTERY RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;
KEY Programmer – Help ECU to recognize the new keys when you need to add new keys.
DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
Rain/Light Sensor - After replacing the front gear or replacing the rain/light sensor, you need to use the D9S PRO to re-match and learn the sensor. Also used to test sensors.
EPB Reset: Reset brake pads to maintain the electronic braking system safely and effectively
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.A/C Relearn - operation data of the compressor is reset and self-learning is performed, and the position of the servo motor is reset and self-learning, which is used to detect and verify the fault location of the air conditioning system.
HV Battery - When the new energy vehicle is faulty and repaired, it is necessary to ensure that the high-voltage battery has no power output. Through this function, the power output of the high-voltage battery to the vehicle can be disconnected, so that the maintenance worker can perform maintenance and inspection on the vehicle safely.
Write VIN - The VIN information is stored in some important ECUs of the vehicle. After replacing the ECU, it is necessary to write the VIN number of the vehicle for verification and download the relevant ECU software. (After replacing the second-hand module, you need to flash the VIN)
D9S PRO also support Throttle Relearn, Disable Transportation, Headlight, Air Suspension, EEPROM Adapter, Reset control unit, VGT Relearn, Nox Reset, FRM Reset, EGR Relearn, AdBlue Reset, SRS, Clutch Adaption, Speed Limit, ADAS, etc
XTOOL D9S Pro has Topology Module Mapping design to give you the distinctive diagnostic results:
1) Displays the entire system through the Topology Map to glance all the modules with faults, which is easy to locate faults and causes.
2) Color-coded topology displays all system status in one page
3) View structure of communication between modules
*NOTE: Please be noted that Topology is not universal to all the above vehicle brand models, please send your VIN to us before you place order.
Why Choose XTOOL KC501 Automotive Key & Chip Programmer?
Powerful IMMO & Key Programming
Read Remote Control Frequency
Perfect Match with XTOOL Advanced Devices
Used with Windows PC/Laptops
Wide Car Coverage
Highlights of Xtool KC501
XTOOL KC501 auto key & chip programming tool not only contains all the functions of the KC100 key programmer and EEPROM adapter, but also supports other IMMO functions and Key & Chip Programming features.
>>> For A Series 2005-2013
>>> For B Series 2005-2014
>>> For C/CLK Series 2006-2014 | CLA Series 2013-2016 | CL Series 2006-2013 | CLS Series 2006-2013
>>> For E Series 2005-2015
>>> For G Series -2015 | GL/GLS Series 2006-2014 | GL/GLK Series 2008-2015
>>> For M/ML Series 2006-2013
>>> For R Series 2006-2017
>>> For S Series 2006-2012 | SLK/GLC Series 2006-2016.
* Because functions are NOT universally compatible with all vehicles. To further check compatibility with the VIN number and the required functions.
Xtool D9S PRO Package Includes:
Read and write keys
KC501 supports read and write keys, support read key remote frequency as well as generate dealers key.
Read and write MCU/EEPROM Chips
KC501 can read and write MCU/EEPROM Chips
Reach and write Mercedes Infrared Keys
KC501 can reach and write Mercedes Infrared Keys, is a perfect key programmer for Mercedes Car Owner.