3 Years Free Update 2024 XTOOL D9S Automotive Diagnostic Tool,Topology Map, Bi-Directional Control, ECU Coding, Full Diagnostics Key Programming, DoIP/CAN FD 42+ Resets

Product Description

XTOOL D9S Smart Diagnostic Tool Scanner Full-System Diagnostic Support DoIP & CAN FD

• OE-Level Full System Diagnostic with Topplogy Module Mapping: With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.

• 42+ Maintenance Services & Full Special Functions: Oil Reset, EPB, BMS, SAS, DP*F, Throttle Relearn, ABS Bleed, Key Programming, injector Coding, Air Suspension, Transmission Relearn, TPMS Reset, Airbag Repair, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector Balance Test, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, rewrite the vin on pcm, alcohol composition reset, suspension calibration, etc.

• New added Programmable Module Installation(PMI) function: When you replace or initialize a new/used module fo Ford/for Lincoln/for Mazda, XTOOL D9S allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

• Bi-Directional Control: Full control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Windows Turn On/Off, Fuel Trim Reset, Fuel Composition Reset, etc.

• Support CAN FD/DoIP: access new communication protocols of CANFD (for GM MY2020+ models), and DOIP (for BMW E/F/G Chassis, for Jaguar, for Land Rover vehicle makes)

• Advanced ECU Coding & Refresh Hidden Functions: XTOOL D9S performs Online &offline Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And reprogram the adaptive data for certain components after repairs or replacements. (Not all vehicles can be supported.)

• Guided Functions: With V.A.G Guided Functions, D9S can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda.

• IMMO/Key Programming: Add/reprogram new Ke*ys/Fob/Remote, d!sable lo~st ke^ys.

• Top Hardward Configuration: Android 10.0 systems, 9.7'' Touch Screen, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 4G RAM & 128G, 6400mAh *7.4V=12800mAh*3.7V battery(which adds 2800mAh than D9).

• Wireless Wi~Fi Connection & Wired Connection: D9S provides 10X faster than traditional BT scanners, built-in Wi~Fi Connection make it easy to move from the dash to the front of the car, which means no need additional W!F! network to connect the scanner, VCI and your car but via the VCI. Please note that downloading software still needs W!F! network. With the type_C to B cable along with VCI, the user has convenience along with certainty that the system will work one way or another.

• 10000+ Vehicle Coverage: Covers 10000+ Vehicles includes American, European, Asian, Japanese brands.

• 3 Years Software Udpate & Support 14+ Languages

• AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

2024 New Upgraded D9S Professional Diagnostic Scanner with Comprehensive Solutions

Advanced ECU Coding & ECU Configuration & Offline ECU Programming

ECU coding capability for VW/for AUDI/for SKODA/for BENZ/for BMW/for Mitsubishi ONLY which performs online & offline Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

Flash Hidden Functions(ECU Configuration) for BMW/for VW/for AUDI/for SKODA/for TOYOTA/for LEXUS/for SCION/for MAZDA/for FORD/for LINCOLN, help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob.

Offline ECU Programming/PMI(Programmable Module Installation) for Ford/Lincoln/Mazda to copy the data from the original module and install it to the new unit to finish the module replacement.

NOTE: D9S does not have the ability to perform online ECU reprogramming.

OE Full Systems Diagnostics

With complete capabilities for read and clean codes, live data graphing, freeze frame, access and diagnose all available modules like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc.

Bi-Directional Control/Active Test

Full bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. Such as EVAP Tests, Compression Test, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Test, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, etc

Live Data Graphing: A line graph will allows you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, etc.

✔ Export Live Data as CSV: Exporting live data as CSV file to track vehicle performance over time.

✔ Up to 8 PIDS Graphing in One: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view.

✔ Graph up to 8 sensors individually on the same screen.

Get more out of the XTOOL 2024 Newest D9S Auto Diagnosic Bi-Directional Tool

✔ Oil Reset: Reset service intervals after oil change and turn off the oil light.

✔ EPB Reset: Reset brake pads after replacement of brake system.

✔ SAS Adjustment: Perform calibration of the steering angle sensor

✔ BMS Reset: Register the new battery to the ECU after replacement.

✔ Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

✔ ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

✔ Injector Coding: Coding injectors after replacement.

✔ Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

✔ Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.

✔ Key Programming/IMMO: D!sable the lo~st vehicle ke^ys and program a new replacement ke^y fob.

✔ Advance Special functions added: Steering position sensor calibration, SWS Calibration, Yaw Rate Sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, reset control unit, A/C Relearn, etc. Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.

Intelligent Topology Mapping for All Systems Diagnostics In a Quick View

• Equipped with color coded module status for faster full system diagnostic results.

• View the communication structure between modules clearly with all the situation of each system.

• One click to display the fault co*de and enter the system executive function directly.

Note: Topology Map compatibility with GM, with CHRYSLER, with JEEP, with DODGE, with FORD, with TOYOTA, with NISSAN, with HONDA, with BMW, with BENZ, with HYUNDAI, with MAZDA(MORE COMING SOON). DO NOT available for All Vehicle Makes. Please come to us for compatibility check.

>>New Update>>New App version above V4.25.4_6.36 adding Topology Map and optimized battery performance for below Vehicle brands:

For GM( For Buick, for Pontiac, for Chevrolet, for Cadillac, for Saturn, for GMC, for Hummer)-->Software package V11.70;

For Chrysler/for Dodge/for Jeep-->Software package V8.7; For VW( for Audi/for VW/for Skoda)-->Software package V13.30

For Toyota-->Software package V13.70; For Nissan-->Software package V12.91; For Honda/for Acura-->Software package V11.60;

For Hyundai/for Kia-->Software package V13.30;

For BMW/for Mini-->Software package V11.95; For Benz-->Software package V20.61;

For Ford/for Lincoln-->Software package V13.4; For Mazda-->Software package V12.2;

More coming soon!

New Upgraded Car Diagnostic Tablet D9S, Upgraded Ver. of D7/D8/D8BT/D8S/D8W/D9

• Built-in Wi~Fi connection & Wired connection: XTOOL D9S offers Wi~Fi connection feature to achieve remote diagnosis at a long range up to more than 66ft, get rid of the shackles of cables, make it easy to move from the dash to the front of the car. Besides, you can use the Type_C to Type B cable to achieve wired connection.

• One Click WIFI Update: D9S car automotive scanner With 3-Year Free Software Update, you are free to update available softwares in any times. Recommend to download the newest software if it is available to get the best experience, as we always focus on our scanner to optimize user experience and improve software issues, improve vehicle coverage and the accuracy of repair.

• AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

• Cover 14+ menu languages: XTOOL diagnostic tool D9S Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.

• Report share and print: D9S auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.

• Cover 10,000+ Vehicles, Up to 2024, 2023, including cars, SUVs, minvans, 12v light-duty trucks

• Support CAN FD Protocol: With CAN FD protocol covers with GM MY2020+ models. No extra CAN FD adapter needed.

• Guided Functions: With V.A.G Guide Functions, D9S can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.

D9S with Newly Upgraded Wireless W!F! Connection Breaks the Traditional Data Transmission & Diagnosis Distance Records!

>>What's the amazoning features of the Built-in WiFi Connection of D9S?

✔64 Mbps(Max) transmission speed （20 times faster than traditional BT scanners）

✔range up to 10-20 meters(33-66 ft) diagnosis distance and further

✔range up to 30meters(100ft) and further without other W!F! disturbance in an open environment

✔access diagnostics within 5-10 seconds (faster)

✔more stable than BT communication

>>Note: There is no need additional WI~FI network to connect the scanner and your car or the VCI, since d9s has its built-in WI*FI, it can connect the scanner and the VCI and also the car automatically after you plug the VCI into vehicle's OBD2 port.

>>Note: This advanced car scanner offers powerful, hassle-free connectivity, bridging the gap between the scan tool and the VCI without requiring additional router or an existing Wi~Fi network.

>>Note: Downloading the software still requires an internet connection.

>>How about the upgraded hardware?

✔XTOOL D9S possess with 9.7 inch, Android 10.0 OS, Quad-Core 1.8GHz CPU Processor, 4GB RAM & 128GB ROM, 4X faster transmission rate, 8MP Camera and built-In Speaker, which greatly increased the speed of running multiple task.

✔D9S has 7.4V*6400mAh battery, which equals to 3.7V*12,800mAh, while the old D9 is only 3.7V*10,000mAh, so this battery actually grows 2800mAh than D9.